STEP1

Place the unity cushions in the front seat. Set the seat headrests well.

Put the two straps on the top inside the head drawbars. Fasten the back tightness and install the quick deduction. (As in figure 1)

STEP2 

Plug the two-plum installed in the former seat into the back seat directly.

Fixed and install.

STEP3

Link the small deduction at bottom of the cushion directly to the bottom of the chair. Clasped it well then. The another set cushion is then installed as shown in the 1-3 steps.

STEP4

Place the cushion on the seat rest. Then hitch the elastic straps on the cushion headrest on the back seatrest. Then fix it properly.

STEP5

Insert the Plum Blossom relying on the bottom of the two seat rest between the joints of back rest and back seat. Then fix it properly.

STEP6

Pave the back seat cushion on the seat. Insert the installed Plum into the joints of back rest and back seat. Then pull the elastic recoil in the two angles to the bottom of the back seat. Then it can be fixed properly.

FINISH